Surface inspection for the metal industry

  • Fast ROI through a short setup time due to pre-installed defect database
  • Optimize your process efficiency and yield
  • Maximum throughput of high-quality products
  • Increased customer satisfaction
steel header

Steel

Advanced surface inspection along the entire production chain

With its complete range of powerful inspection systems, ISRA PARSYTEC offers full quality monitoring throughout steel production and processing. Our systems are easy to integrate at every production step, from slab to coated sheet. The collected data not only provides a solid decision-making basis for enhancing quality and processes but also leads to waste reduction.

The combination of sensors and specialized illumination technologies, whose parameters can be adjusted to meet specific application requirements, make it possible. High-quality defect data allows users to subsequently pinpoint the causes of defects.

Our solutions for aluminum, copper and other non-ferrous metals are powered by our brand:

product branding

Whitepaper: Surface inspection & quality management enable flawless steel quality

Find out how you can achieve the highest steel quality along the entire production chain, from steel making through the different processing lines up to delivering lines.

production-chain-optimization-thumbnail

Hot Inspection

Hot Rolling

Detect all relevant defects in the hot rolling mill and pinpoint their causes

Optimized material and production costs are achieved by early detection of all quality relevant defects in the hot rolling mill. Conceived for harshest production environment, automated inspection solutions form ISRA PARSYTEC provide early and precise defect identification throughout the entire production step of red hot strips at high speed processing.

This allows users to pinpoint the defect causes and correct them by replacing rollers.

3D inline inspection makes invisible defects visible

By combining 2D inspection with 3D laser triangulation, ISRA PARSYTEC is able to reliably distinguish between material defects and the surface structure of slabs or heavy plates. Invisible to standalone contrast-based 2D, the 3D inspection reliably detects defects on highly structured, extremely hot material.

The unique combination accurately detects and classifies all quality-related defects and measures their depth - right at the start of the production process. 

The inspection data generated is vital for quality evaluation, preventing unmarketable products from being processed further.

 “The decision to partner with ISRA PARSYTEC was made because of the innovative technology of having 2D and 3D in the same sensor. In addition, the expandability and flexibility of the system allowed us to start with a bottom-only solution and add a top-side later.”

Rolling and finishing supervisor, renowned US American heavy plate producer

Benefits

  • Typical payback period of just a few weeks due to easy setup
  • Minimize grinding or scarfing with early detection
  • Deliver high quality slabs and heavy plates by combing 2D and 3D detection for outstanding inspection performance
  • Avoid disaster events due to improved roll change
  • Reduce maintenance costs and avoid upcoming hazardous situations and repair times
  • Combined 2D and 3D detection
  • System sensor developed for harsh environmental conditions 
  • Blisters
  • Shells
  • L-Cracks (longitudinal cracks)
  • E-Cracks (edge cracks)
  • Scratches, grooves and gouges
  • Strip edge defects

Download additional information

asdf

EXPERT5i brochure en

EXPERT5i brochure en
Filename
brochure-expert5i-metal-en.pdf
Size
1 MB
Format
pdf
Download
test123

Plate Master flyer en

Plate Master flyer en
Filename
flyer-plate-master-metal-en.pdf
Size
1 MB
Format
pdf
Download

Slab Master flyer en

Slab Master flyer en
Filename
flyer-slab-master-metal-en.pdf
Size
927 KB
Format
pdf
Download

Surface Master brochure en

Surface Master brochure en
Filename
brochure-surface-master-metal-en.pdf
Size
1 MB
Format
pdf
Download

Quality & Yield Optimization brochure en

Quality & Yield Optimization brochure en
Filename
brochure-quality-and-yield-optimization-en.pdf
Size
842 KB
Format
pdf
Download

Whitepaper: 3D surface inspection ensures highest quality in steel production

Learn how to achieve significant cost savings and immediate workflow efficiencies.

3d-inspection-thumbnail

Cold Inspection

Cold Rolling

Ensure the highest quality throughout the production process

Identify defect sources for easy correction: ISRA PARSTYEC delivers leading surface inspection solutions for all standard cold rolling and processing applications for the steel industry, from Pickling, Annealing, Stainless Steel Annealing Pickling and Cold Rolling to Galvanizing, Tinning, Organic Coating, Recoiling & Slitting to Skin Pass processes.

The unique multi-stage classification technology provides excellence in defect exact defect naming. Fast, accurate and flexible, the classifier combined with a learning classifier for line specific defects and a pre-set defect database for standard applications delivers oustanding classification performance.

  • Set-up, commissioning and tuning designed for operators not scientists – easy to understand and to operate
  • Integrated, intelligent and intuitive tools to manage image defect collections and classifiers – simple to utilize, highly reliable
  • Classifier tuning without influence on running production including extensive check of tuning results for risk free switch from test to active classifier

In addition to standard solutions, process-specific software modules intelligently connect and evaluate the inspection and process data collected along the production line. Compiling all available information helps uncover important correlations and untapped potential in quality management and production optimization.

The innovative detection technology detects even extreme low-contrast defects in cold rolling, even at high processing speeds and under difficult ambient conditions. Defect-related information influences classification and enhances its accuracy.

Benefits

  • Quick installation due to automatic detection optimization
  • Leading surface inspection system for all standard applications in the metal industry
  • Prevention of precautionary quality downgrading, resulting in the best price for each individual coil
  • Fewer customer complaints with guaranteed product quality
  • Lower production costs and no further processing of defective products
  • Fastest setup times: Classifier includes over 80% of all typical defect classes with its standard installation

  • Multiple-view-sensors guarantee high quality defect information for highest classification results

Download additional information

Surface Master brochure en

Surface Master brochure en
Filename
brochure-surface-master-metal-en.pdf
Size
1 MB
Format
pdf
Download

EXPERT5i brochure en

EXPERT5i brochure en
Filename
brochure-expert5i-metal-en.pdf
Size
1 MB
Format
pdf
Download

Quality & Yield Optimization brochure en

Quality & Yield Optimization brochure en
Filename
brochure-quality-and-yield-optimization-en.pdf
Size
842 KB
Format
pdf
Download

Webcast: Inspection solutions for cold rolling

Join Greg Gutmann, Solutions Consultant Metals at ISRA Vision Parsytec, as he presents groundbreaking inspection solutions for cold rolling mills. Learn more about the innovative heavy-duty sensor designed for harsh mill environments, ultra-low contrast detection for predictive maintenance and the Constant Pass Line Distance solution that transforms coil inspection. Download the webinar now to stay ahead in the metal industry!

Cold Rolling Webcast

Production analytics - Data-driven efficiency

The web-based production analytics platform allows you to check the system status of all production lines at a glance or analyze production data in detail. With the quality management system, you analyze historical data, monitor current inspection data in real-time, and identify future trends in your production process.

Early detection of production defects

Detect and quickly identify the cause of threshold value violations at every stage of production with live status information and automatic alerts. As a result you can quickly resolve production defects, shorten downtime, and reduce production costs.

Predictive maintenance

You can prevent potential system failures by analyzing real-time data from the sensors and monitoring systems. This allows proactive planning of maintenance, based on the actual condition of the machines, instead of following a fixed schedule. This data-driven approach saves costs through reduced downtime and increased overall productivity, as well as longer production line life. 

Optimization of production

Dashboards allow you to compare production line and product data onsite or remotely, providing key insights for optimization. This enables you to make informed professional decisions along your value chain to increase the product quality as well as profitability. You can continuously track the progress of optimization measures and present them with visualized advanced reports.

Your benefits

  • Time-saving multi-line overviews, one view for all quality-related information
  • Minimize downtime by monitoring system health data
  • Faster reaction to quality issues with quality data monitoring
  • Fast elimination of production defects, reduction of production costs
  • Improved maintenance for reduced downtime, higher overall productivity and longer production line life

Key Features

  • Overview on production data and plant status
  • Live insights from real time data
  • Department oriented dashboards, customer specific adaptations are possible
  • Web-based solution, no client software installation required
  • Threshold monitoring and alerting
  • Open to integrate relevant third-party data and export data to the customer's systems

Service solutions and individual trainings

For the efficient and future-proof operation of your production systems our highly qualified service teams support you globally in all matters. We provide the implementation, maintenance and servicing as well as the analysis and optimization of your systems.

Learn in the ISRA VISION Academy how our competent trainers always keep your employees up to date with the latest knowledge so that system operators, product engineers and quality managers become real inspection experts.

Contact our experts

Guido Maass
Sales Director Business Unit Metals

Pascalstrasse 16
52076 Aachen
Germany

Phone: +49 / 2366 / 9300-315

E-mail: [email protected]

Contact us